Sell hot sale Tuya zigbee3.0 leak alarm water flood detector smart home alarm overflow and full water remote alarm Water Immersion sensor smarthome02 best price

Package Included: Water Immersion sensor x1 Instruction x1 Specifications: working temperature:0-60 ℃ Working voltage:4.5 V Working current:10/1/3.5 ma Product size:Height:43, diameter 119 mm Power supply mode:AAA battery * 3(not include) protocol:zigbee colour:white material:PVC Flooding alarm:Water leakage / normal Electricity:0-100% Description: Intelligent water immersion sensor is a sensor to detect whether there is water leakage or rain immersion in the room. In case of water leakage,an alarm will be issued immediately to prevent the loss and harm caused by water leakage accident. Water immersion sensors are widely used in homes, data centers, communication rooms, power stations, warehouses, archives and other places that need waterproof. The water immersion sensor can only detect the leakage of low water level. Do not immerse the sensor completely in water, which will cause short circuit of the equipment. Note: please use a good quality battery, otherwise it will affect your experience! App installation 1.Download the Smart Life/tuya app , install and complete the registration. After registration, log in to the app. After login,you need to build your own family. 2.Make sure ZigBee gateway is connected to WiFi signal and connected to Internet. 3.Use a screwdriver to open the screw at the bottom of the water immersion sensor and install three AAA batteries. Open the upper cover of the sensor shell, press and hold the reset button for 5 seconds, and the indicator light flashes quickly to enter the distribution network state. 4.Open the [Smart life] app, click the "+" in the upper right corner to find the sensor category, then select ZigBee sensor, select the ZigBee gateway to be added, ensure that the indicator light of the flooding sensor flashes quickly, and click "next" to enter the distribution networkprocess. 5.Ensure that mobile phones have WIFI connection,After the WIFI password input,Click on the confirmation.APP to jump is connecting interface,Distribution network progress indication,When reached 100%,Equipment will complete distribution network and add into the interface,Select add device to the room,Modify the device name and then click the "complete",APP will enter a device interface.