Sell Single Firewire Touch Tempered Glass European Standard Wall Switch Panel Household Type 86 smart02 best price

Package Included: 1*switch, 1*capacitor, 1* manual, 1*installation package Specifications: Our advantage: *With red and blue LED indicators, it will not make people dazzled and confused in the dark, and will not be very bright (bring you a very comfortable feeling), red is always on, blue is always off *Single live wire control, easy to install, can directly replace the old switch *Toughened glass can prevent scratches on knives or hard objects. *Suitable for: incandescent bulbs, fluorescent lamps, energy-saving lamps, LED lamps (power lamps above 3W) *Toughened glass, easy to clean. Does not fade, looks like new *Can be touched with wet hands *Fire protection, strengthen the short circuit protection of the power cord * Prevent overcurrent and anti-interference. *After turning off the power, the switch remains off Description: Product parameter Shell material: PC flame retardant material Panel material: tempered glass Installation hole distance: 86mm Rated voltage: 90-250V, 50-60Hz Start method: touch Load power; 3-300W / open note 1. The capacitor must be tightly connected to the L and N of the L1 lamp, not behind the switch. Tips 2. When the switch is in the energized state, do not put a cover on the glass panel. When the switch is in the energized state, place the glass panel top cover on it. Then the switch will not work Please restart the main power switch at home. It will work 3. Solve the problem of insensitive touch Problem: The switch base is screwed too deeply and too tightly, resulting in a gap between the backlight board and the panel. Solution: Don't screw the locking screw too deep, if you can't reach it, you can replace it with a longer screw; or fill something between the switch and the bottom box. For touch-sensitive situations, as long as you pay a little attention during the installation process, this usually rarely happens. remind: 1. This wall switch does not have 433MHZ. Cannot pair with wireless switch panel. 2. The switching power is 3~300W. If the lamp power exceeds 300W, please do not use this switch. If the power of the bulb is less than 3W, please make sure to install a capacitor, otherwise it will not work properly.