Singapore

Features

Well waterproof performance, fast temperature rising, temperature uniformity,High thermal efficiency, well toughness

Conform to the American UL94 level V0 flame resistant standard

Easy to use, safe service life for ten years, not easy aging

With European standard plug



 Specifications

 Material: Silicone rubber + fiberglass cloth

 Size: 9 x 13cm

 Wire length: 210cm

 Color: orange

 Voltage: 220 v, 250 w

 Using range: All kinds of automobile fuel tank, water tank, storage battery, anti-freezing heat insulation



 Usage:

 Product with double-sided adhesive on the back, can be directly stick on the heated products, the highest heat resistance temperature to 200℃, will never fall off



 Installation:

 Use pressure-sensitive adhesive to stick it on the flat and smooth artifacts

The maximum service temperature of pressure sensitive adhesive: 150℃ Continuous temperature, 230℃instantaneous temperature. Power density is less than 0.9 W/c ㎡

Silicone rubber heater with pressure sensitive adhesive should be used in half a year after processing, otherwise it will influence on the performance of the glue using



 Instructions

The electric heating device must pay attention to use, its working temperature should be less than 240 ℃, the continuous use instantaneous does not exceed 300 ℃.

when the work temperature less than 240 ℃, the current density is up to 3 w/c ㎡

Paste the type installation conditions, allowed working temperature less than 150 ℃

Working voltage selection with high power high voltage, low power low voltage for the principle, special needs can be exceptions.



 Package included

 1 x Car heater tank 




Notes:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!