Singapore

Description:
Color: red (WIFI);
Material: ABS+PC electronic components
Chip: PIC18F25K80
Version: WIFI version
Subnet: 255.255.255.0
Port: 35000
Range: 50 feet (line of sight)
Antenna: internal
Power consumption: 0.75 watts
IP: 192.168.0.10
SSID: WiFiOBD
Wifi standard: 802.11a / b / g
Working temperature: -15 to 100 degrees Celsius
Uses: car fault diagnosis, car fault code reading
Connection method: mobile phone Bluetooth, WIFI connection
Product size: 8.5*4.5*2.5cm


Product Features:
By installing the appropriate software on your host device, you may read the following parameters from the vehicle:
Speed
-Speed
-Fuel consumption
-Engine coolant temperature
-Fuel pressure
-Calculated engine load
-Throttle position
-Intake manifold pressure
-Intake air temperature
-Time ahead
A. Air mass flow
B. oil level
C. air pressure
D. EVAP system vapor pressure
E. Fuel curve


Supporting agreement:
-SAE J1850 PWM (41.6Kbaud)
-SAE J1850 VPW (10.4Kbaud)
-ISO9141-2 (5 baud init, 10.4Kbaud)
-ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
-ISO14230-4 KWP (fast init, 10.4 Kbaud)
-ISO15765-4 CAN (11bit ID, 500 Kbaud)
-ISO15765-4 CAN (29bit ID, 500 Kbaud)
-ISO15765-4 CAN (11bit ID, 250 Kbaud)
-ISO15765-4 CAN (29bit ID, 250 Kbaud)
A.SAE J1939 CAN (29bit ID, 250*Kbaud)
B.USER1 CAN (11*bit ID, 125*Kbaud)
C.USER2 CAN (11*bit ID, 50*kbaud)
*Default settings(user adjustable)


Support for cars: If your vehicle does not fall into the above categories, look under the hood and try to find a label that clearly indicates that the vehicle is designed to comply with OBD-2 regulations.
This elm327 can usually be used with OBD 16pin adapters and 12V engines on most new cars:
American car brand, after 1996;
After 2001, it was a European automobile brand (gasoline);
After 2004, it is a European automobile brand (diesel);
After 2002, it is a Japanese car brand;
Indian car brand, after 2010;
Russian car brand, after 2012;
Hardware requirements: for Android, for IOS, for Windows


NOTE:Bluetooth version only supports Android system, WIFI version supports Android and IOS system


* Firmware version V1.5 (supports more protocols SAE J1850 than V2.1).
* With chip: PIC18F25K80, supports all elm327 functions, and displays all functions in the program ELM327 identifier.
* It understands commands such as ATPPS.
*The crystal oscillator has a frequency of 4mHz.
*Read a lot of vehicle information by installing the appropriate software on the host device.


Packing list:
1*ELM327 OBD Diagnostic