TFT Display 0.96 / 1.3 inch IPS 7P SPI HD 65K Full Color LCD Module ST7735 Drive IC 80*160 (Not OLED) For Arduino (1)
TFT Display 0.96 / 1.3 inch IPS 7P SPI HD 65K Full Color LCD Module ST7735 Drive IC 80*160 (Not OLED) For Arduino (2)
TFT Display 0.96 / 1.3 inch IPS 7P SPI HD 65K Full Color LCD Module ST7735 Drive IC 80*160 (Not OLED) For Arduino (3)
TFT Display 0.96 / 1.3 inch IPS 7P SPI HD 65K Full Color LCD Module ST7735 Drive IC 80*160 (Not OLED) For Arduino (4)
TFT Display 0.96 / 1.3 inch IPS 7P SPI HD 65K Full Color LCD Module ST7735 Drive IC 80*160 (Not OLED) For Arduino (5)
TFT Display 0.96 / 1.3 inch IPS 7P SPI HD 65K Full Color LCD Module ST7735 Drive IC 80*160 (Not OLED) For Arduino (6)

Sell TFT Display 0.96 / 1.3 inch IPS 7P SPI HD 65K Full Color LCD Module ST7735 Drive IC 80*160 (Not OLED) For Arduino best price

5
2
ratings
3
sold
SGD 4.13 - SGD 7.28
Ships from
Mainland China
Options
0.96 inch TFT
1.3 inch TFT

Product Description

0.96inch TFT Display Mode Normally black IPS Display Format Graphic 80RGB*160 Dot-matrix Input Data SPI interface Drive IC ST7735S Dimensional outline 24(W)*30 (H)*2.8+/-0.1(T)mm Resolution 80RGB*160 Dots LCD Active area 10.8 (W)*21.7 (H) Dot pitch 0.135(H) x 0.1356(V) mm Viewing Direction All View Operating Temperature -20~70°C 2.Pin Descriptions: PIN No Symbol Description 1 GND Ground 2 VCC Power 3.3V 3 SCL Serial clock pin. 4 SDA Serial data input 5 RES LCM Reset pin This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. 6 DC Data/Command Control 7 CS Chip Select 8 BLK Backlight control pin 1.3 inch TFT 1.Features Display Mode Normally black IPS Display Format Graphic 240RGB*240 Dot-matrix Input Data SPI interface Drive IC ST7789VW Dimensional outline 27.78(W)*39.22 (H)*3.0+/-0.1(T)mm Resolution 240RGB*240 Dots LCD Active area 23.4 (W)*23.4 (H) Dot pitch 0.0975(H) x 0.0975(V) mm Viewing Direction All View Operating Temperature -20~70°C 2.Pin Descriptions: PIN No Symbol Description 1 GND Ground 2 VCC Power 3.3V 3 SCL Serial clock pin. 4 SDA Serial data input 5 RES LCM Reset pin This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. 6 DC Data/Command Control 7 BLK Backlight control pin

Product Specifications

Warranty DurationNo Warranty
Warranty TypeNo Warranty
Country of OriginChina
Safety Mark

From the same shop

Related items

You may also like