Sell Set-1/4 Inch Quilting Foot/Adjustable Guide Foot/Edge Joining Stitch In The Ditch Presser Foot For Most Low Shank Sew best price

Adjustable Guide Sewing Presser Foot guides your topstitching and decorative stitching perfectly Fits All Low Shank Snap-On Singer* (Some Singers Require Low Shank Adaptor), Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Necchi and Elna Sewing Machines… 1/4 Inch Piecing Foot with Guide: Hold fabrics in place while leaving a space to allow open decorative stitches such as open weave stitches. Reference marks to increase accuracy. Foot can be used to line up and sew edgings such as lace to edges of other fabric. Centered blade enhances ability to follow the edge of the fabric. 1/4 (Quarter Inch) Quilting Sewing Machine Presser Foot:the Quilting Foot is an Edge Guide to Help You Make a Perfect 1/4 inch Seam This is a must when doing a lot of sewing with quarter inch seams. Especially in quilting, without this foot you may find it difficult to get seams to line up perfectly. Great for topstitching or attaching bias tape Accurate reference marking on 3 sides of foot for visibility and accuracy Single hole foot prevents fabrics from sinking into feed dogs,For all 7mm feed dog machines Adjustable Guide Sewing Presser foot: The sewing center pressure foot has a metal ruler with a guide, you can remove the guide for adjust. The Foot guides your topstitching and decorative stitching perfectly. The presser foot has a “ruler” with a guide designed so you can place the guide anywhere you want. Place the guide along an already stitched seam or against any edge to give you beautiful topstitching. Use both straight and decorative stitches.It is perfect for channel quilting too. colour:Silver Material:metal Package Contents: 1*1/4 block presser foot 1* ruler presser foot 1* splicing presser footOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.