Sell Selleys No Mould Silicone Sealant - White / Translucent 100ml / 290ml (Waterproof Seal, Stops Mould Growth) best price
4.9
66
ratings
96
sold
SGD 11.1 - SGD 32.2
Brand | Selleys |
---|---|
Ships from | Singapore |
Color | White 290ml White 290ml,Bun of 2 White 100ml White 100ml,Bun of 2 Translucent 290ml Trans 290ml,Bun of 2 Translucent 100ml Trans 100ml,Bun of 2 1 White,1Trans 290ml 1 White,1Trans 100ml |
Product Description
Selleys No Mould Silicone sealant is specially designed to create a long lasting waterproof seal in areas where mould resistance is necessary
Suitable for – Ceramic, Glazed & porcelain fixtures, Aluminium, Plastic laminates, Some rubbers, Glass, Stainless Steel
Features
Superior formulation+ that stops mould growth*
Fast skinning formulation which means you can use your shower in 1 hour#
Provides a durable waterproof seal
Resists lifting
Suitable for use in humid and damp environments such as
Kitchens
Bathrooms
Laundries
Showers
Basins
tiles
Worktops
Baths & spas
Plumbing fixtures
Store in a dry place below 30°C. Use within 6 months of opening.
How to use:
Before applying your new sealant we recommend spraying Selleys Rapid Mould Killer into the gap to kill any residual mould
Thoroughly clean surface where sealant will be applied with turps and dry completely
Cut nozzle at 45°angle, cut cartridge tip and fit nozzle
Place in a caulking gun, apply with steady pressure, ensuring sealant is pushed into the joint
Tool with a spatula dipped in detergent water within 5-10 minutes of application
Clean up with turps before product skins
Limitations:
+Compared to Selleys Wet Area
#Sealant will be waterproof and shower ready in 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (at least 48 hours)
*To maintain your sealant properties, ensure you regularly clean off any soap scum and dirt as these encourage mould growth
Not suitable for aquariums, food or drinking water contact, permanent immersion in water, or metals other than aluminium and stainless steel. Not suitable for PE, PP, PTFE and some rubbers. Pre-test on other surfaces for compatibility