Sell Selleys Heavy Duty Cartridge Silicone Caulking Gun best price

Step 1: Become one with the caulking gun Each caulking gun typically has a barrel or cradle that holds the cartridge, a plunger rod, a large trigger for extruding product and a small trigger to release the plunger rod to remove the cartridge. Step 2: Prepare the cartridge To prepare your cartridge cut the tip off the cartridge, secateurs work very well for this and are safer than knives. You will also want to cut the nozzle to the width of the joint or desired bead size, this should be done on a 45 degree angle. Once done insert the cartridge in to the gun, you will need to ensure the plunger rod is pulled all the way out. Step 3: Apply the product If this is your first time using a caulking gun get some practice by gunning the product on to some cardboard to get a feel for how it comes out. When you are ready you can apply the product in to the joint. Do this by gunning in a forwards direction making sure the product is pushed in as you go. You will find that when you have to release the trigger to pull again you may get a little blob appear, this can be smoothed out after application when you smooth your sealant, glues will just get squished flat. Step 4: Finish off your joint You are now ready to finish off your joint, soapy water often works well for this but the manufacturer of the product will recommend the best way to finish their sealants or fillers. Glues can be brought together and clamped in place until the dry. https://youtu.be/iC_eV1ONO-I