Sell PCI-E to SATA3.0 Riser Card Adapter Card ASM1061 PCIE SATA3.0 Ready Stock best price
0
ratings
SGD 63.32
50% OFF
SGD 31.66
| Ships from | Mainland China |
|---|
Product Description
1. Best results can be achieved with SATA3.0 data cable
2. PCI-E must have a slot above V2.0. For V1.0, the speed will not exceed 250M. Regardless of whether it is X1 or X16, PCI-E only needs to be V2.0. If there is a spare X16 slot, just insert it. On the X16 slot,
3. After inserting the card, you can see it. gen1 is working in 1.0 e. gen2 is the meaning of 2.0 e
4. Motherboard BOIS setting: SATA e should be changed to AHCI. Although some motherboards PCIE is version 2.0, BOIS does not enable high-speed transmission e by default, ie (gen2 high speed e) needs to be turned on manually
System Requirements:
This card is based on the SATA3.0 function provided by the admedia ASM1061 chip. It is used to expand the SATA3.0 interface and cannot be used as an array.
This card must use the PCI-E 2.0 slot to increase the speed. Please confirm the specifications of the PCI-E slot on your motherboard.
There are many factors that affect the speed, such as the motherboard, north-south bridge chip, PCI-E version, hard disk, data cable, etc. There is no guarantee that the theoretical speed of SATA3.0 can be reached by plugging in this card.
To install XP with this card, you need to download the driver first, start with the installation disk, press F6 to install in SCSI e, first import the driver before installing. There is no such problem with WIN7. Cannot install with GHOST because the disk cannot be found under PE and DOS.
Supported data transmission speed can reach 6.0Gbps, 3.0Gbps, 1.5Gbps
Bus interface: PCI-Express x1
Expansion interface: 2 SATAIII interfaces + 2 ESATA (switched by jumpers)
Compatible with SATA (III, II, I) Hard Drives, SSD, etc.
Support 4T hard disk
Colour:black
Material:PCB
Package Contents:
1 * Expansion CardOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.