Sell Mega 2560 R3 REV3 ATmega2560-16AU Board USB Cable Compatible For Arduino With USB Cable Compatible -GLOBALSALE best price

DescriptionThe Mega is compatible with most shields designed for the Duemilanove or Diecimila.The Mega 2560 is an update to the Mega, which it replaces.The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip.Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.The Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins(of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.Specification:Operating voltage: 5V.Input voltage (recommended): 7-12V.Input voltage (limits): 6-20V.Digital I/O pins: 54 (of which 15 provide PWM output).Analog input pins: 16.DC current per I/O pin: 40 mA.DC current for 3.3V pin: 50 mA.Flash Memory: 256 KB of which 8 KB used by bootloader.SRAM: 8 KB.EEPROM: 4 KB.Clock speed: 12 MHz.Color: blue.Size: 147 * 120 * 13mm.Note:There might be a bit color distortions due to different computer resolutions.There might be size errors due to different computer resolutions.Package include:1 * ATmega2560-16AU board.1 * USB cable.