Sell Loctite Clear Silicone Waterproof Sealant Aquarium Aquaponics Safe best price

Loctite Clear Silicone is a multipurpose adhesive and sealant which creates a waterproof, protective seal that is ideal for metal, glass, rubber, tile and porcelain. It is designed to be used indoors and outdoors to repair everything from electrical connections to seams on boots to stop leaks in wet weather. Loctite Clear Silicone can be used to bond or repair saltwater or freshwater aquariums. Features & Benefits:  Extreme Temperature Resistance  Aquarium Safe  Waterproof`  Gap Filling  Flexible bonds, Impact resistant and flexes with materials  Multipurpose Adhesive/Sealant  All-season use  Indoor and outdoor use  One-time application  Excellent for imperfect surfaces  No cracking, peeling or shrinking Recommended For: Loctite Clear Silicone Waterproof Sealant can be used for bonding ABS, glass, ceramic, porcelain, wood, aluminum, stainless steel, cultured marble, fiberglass, granite, vinyl tile, some rubbers and plastics. Use for sealing or repairing door frames, windows, vents, toys, appliances, gaskets, weather-stripping, outside of fireplace doors, shoes and boots. Limitations: Not recommended for use on the following plastics: polyethylene, polypropylene, polytetrafluoroethylene (PTFE), polymethylmethacrylate (PMMA), polycarbonate or PVC Not recommended for use on marble, limestone, cement, concrete, brass, copper, magnesium, iron, zinc or galvanized metals Not paintable Not suitable for use on aquariums greater than 30 gallons (114 L) and/or containing water greater than 18” (46 cm) in height Not suitable for use below grade, stovepipe, chimney or fireplace applications Not suitable for contact with oil-based caulking, polysulfide and fillers impregnated with oil, asphalt or tar Application Temperature: -37°C to 60°C Working Time: 5-10 minutes* Tack-Free Time: 2 hours* Cure Time: 24 hours* *Times are dependent on temperature, humidity, porosity of surface bonded and amount of adhesive used Typical Cured Performance Properties: Color: Clear and Colorless Cured Form: Non-flammable, semi-flexible solid Service Temperature: Long Term (Continuous) Exposure -60°C to 177°C Short Term (Intermittent) Exposure -60°C to 200°C Water Resistant: Yes Paintable: No Directions: Preparation: Use between -37°C and 60°C. Protect work area. Surfaces must be clean, dry and free of old caulk, grease, dust and other contaminants. Note: Paint will not adhere to silicone. If desired, paint items prior to gluing. Application: As a sealant: Apply with a steady pressure, forcing sealant into the joint. Tool within 5 minutes. Do not use in joints deeper than 12 mm (1/2”) without the use of a backer rod. Use in joints between 1/4” and ¾” wide. For aquariums: Apply a 1/4” bead to the edge of glass, covering the thickness of the glass edge. Set glass on base and repeat procedure for all sides. All joints must be glass to sealant to glass with no entrapped air bubbles. Apply additional sealant to inside joints.