Sell (Local) Semiblack 400/1000 Grit Combination Whetstone Sharpener / Chef Knife Sharpening Stone best price

Website: https://www.semiblack.sg/products/semiblack-400-1000-sharpening-stone THIS WHETSTONE IS: - Soaking - Soak for at least 5 minutes before use - Slow Cutting - Handles low to medium alloy steels just fine, not suitable for harder steels - Medium Wearing - This stone dishes fairly slowly with softer steel (slower than KW-65) - Low priced - Great for starting out! This should be your very first whetstone when starting out! Its not too expensive, and can handle any steel up to VG10. The tactile feedback is good and you can easily find the correct sharpening angle (even when using it for the first time!) If you sharpen weekly we recommend the #400 to #1000 progression to fix any micro chipping that occurs on the edge. If you sharpen twice or more per week we recommend using the #1000 side only. Then once per month use the #400 side to fix any micro chipping that may occur on the edge. Results to Expect: The edge will easily cut paper using a "slicing" motion, but will not "push-cut" paper. This edge is usable for 95% of kitchen tasks. You may proceed to a leather strop after sharpening to achieve a razorsharp edge. Troubleshooting: If your edge is sharp in some areas but not in others, check that you have deburred consistently throughout the edge. Also, make sure you have a consistent sharpening angle throughout the length of the blade. Dimensions: 180 x 60 x 30mm Weight: 618g This whetstone ships from our warehouse in Singapore, for local deliveries it takes 2 days to arrive.