Sell K&F Concept Updated FD to FX Adapter, Manual Lens Mount Adapter with Matting Varnish Design, Compatible with Canon FD FL Mount Lens and Compatible with Fujifilm Fuji X-Series X Mount Cameras best price

Make sure this fits by entering your model number. 【Attention】 Manual adapter without electrical contacts in the adapter ring and cannot achieve auto diaphragm or auto-focus, please be careful. 【Function】 This adapter helps to connect FD mount lens to Fuji X-mount cameras. Infinity focus function is allowed, please adjust manually when first use. 【Cameras】 Designed to compatible with Fujifilm Fuji X-Series Mount Cameras: Fuji X-Pro1, X-Pro2, X-T1, X-T2, X-T10, X-T20, X-E1, X-E2, X-E2S, X-A1, X-A2, X-A3, X-A10, X-M1 etc. 【Material】 Upgrade all-metal and matting varnish design to avoid light reflection, high quality adapters with anodized aluminum construction. 【Verify Your Lens and Camera Mount】 You can find your lens/camera mount in the len's/ camera's original user manual. Or find your lens/camera on the manufacturers' website and under the product specifications look for "mount type". Any question about products please contact us freely for suggestions. K&F Concept Updated Manual FD to Fuji X Adapter Instructions for use: Attach the orange side to the camera and silver side to the lens. Properly installed when you rotate about 90 degrees and feel a light "click". Please screw the lens adapter lightly and skillfully, needn't too much force. Infinity focus position: The position of the infinity mark [∞] of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity. 'No Lens Attached' - Warning Message Appears: The camera needs to be set to function without an E-Mount lens attached. You can do this by changing the following camera setting: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location of this option may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default. Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released. Features: Lens: Canon FD FL Mount Lens Camera: Fuji X-Series Mirrorless Cameras: X-Pro1, X-Pro2, X-T1, X-T2, X-T10, X-T20, X-E1, X-E2, X-E2S, X-A1, X-A2, X-A3, X-A10, X-M1 etc. Compact and high quality with matting varnish design Precise production to ensure the perfect fit Diaphragm control of the lens is set manually Allows focus infinity Elegant clear appearance