Sell infotec Y13 Night Vision Rotating Wifi Network Surveillance Camera best price

◎Through the mobile App, read, listen, and talk immediately ◎Remote mobile phone/tablet 24 hours smart monitoring ◎Mobile phone/tablet can directly control lens steering ◎Infrared night vision, support photography in low light environment ◎Someone invades, APP can send an alarm notification immediately ◎Insert memory card to support instant video recording and playback Infotec Y13 night vision rotating wireless network camera [INF-IP-Y13] ◎Through the mobile App, read, listen, and talk immediately ◎Remote mobile phone/tablet 24 hours smart monitoring ◎Mobile phone/tablet can directly control lens steering ◎Infrared night vision, support photography in low light environment ◎Someone invades, APP can send an alarm notification immediately ◎Insert memory card to support instant video recording and playback How to use: ◆Connect to power -Connect The built-in transformer and USB power cord to the power cord behind the camera. -Please Wait patiently for about 20-30 seconds, the network camera will start to rotate. -Turn And emit a prompt to indicate power-on complete ◆Installation settings (mobile phone has been connected to WIFI signal/this product only supports WIFI 2.4G signal) -Download The dedicated APP "YCC365 Plus ", in the mobile phone, and complete the account registration and login. -Put On "YCC365 Plus ", click "+" on the upper right to add new devices.Choose "Smart Camera" -Click "Scan Code Add ".Click the next step. -Input The WIFI name and password at home.Click the next step. -Aim At the "QR Code" displayed on the phone screen to the camera lens, slowly pulled away from nearby, Move and scan before and after about 10~15cm, click on the next step after hearing the beep prompt sound. -The Device is connected immediately, the process takes about a few minutes, and the addition is successful after completion. -Can Start using it after setting the camera name. ◆Installation settings (when the QR code fails scanning) -Download The dedicated APP "YCC365 Plus ", click "+" new device above the upper right. Select "Smart Camera ". -Click "AP Hotspot add ".Click the next step. -Connect The device hotspot, click "Go to Settings ". -Click To enter WIFI settings. -Click On the connection hotspot "CLOUDCAM _ XXXX (random code number at the rear of the host) ". 6.The APP screen display has been connected to the device hotspot, click the next step. -Choose The name and enter the password to connect WIFI. -In The device connection, it will be displayed as successful after completion, and it can be used after setting the camera name. ◆Micro SD (TF) memory card video storage Just insert the memory card into the memory card slot behind the product to directly start storing the video. Can be directly used on mobile phone/tablet for video playback ※ This product supports up to 128G memory card/TAT32 format, and the memory card needs to bring its own! ※ When using it for the first time, please go to the APP setting to check whether the