Sell (in stock) 433Mhz Wireless smart Switch push Light RF Remote Control Receiver Wall 100~ 240V best price
0
ratings
6
sold
SGD 8.99
44% OFF
SGD 5 - SGD 29.64
| Ships from | Mainland China |
|---|---|
| 颜色 | w 1 gang 1 Receiver w 2 gang 2 Receiver w 3 gang 3 Receiver White 1gang White ２gang White ３gang 1 RF + 433 receiver 2PS 3gang3Receiver W 2PS2gang2Receiver W 2PS1gang1Receiver W |
Product Description
product parameters:
1, working voltage: AC85-240V 60HZ/50HZ
2, working frequency: 433.92MHZ
3, the total load power: <1000W
4, receiving sensitivity: -108dBM
5, working method: wireless remote control
6, coding method: learning code
7, modulation method: ASK
8, working temperature: -10 ° C ~ +70 ° C
9, size: 72 * 38 * 26 (mm)
Wireless switch parameters:
1, working voltage: DC 3V
2, working frequency: 433.92MHZ
3. Transmitting power: <10mW
4. Remote control distance: <50 meters (indoor distance)
5, working method: wireless remote control
6, coding method: learning code
7, modulation method: ASK
8, working temperature: -10 ° C ~ +70 ° C
9, size: 86 * 86 *15 (mm)
10. use 1PC CR2032 Alkaline Battery (Included Battery),The service life is about 12 months. Life and frequency of use are related. Time may be longer
Our advantage:
1.First suggest watching the video in the link, you can better understand the product
2. Spot sales. Ship parcels within 24 hours, usually about 5~8 days on the day of arrival (excluding weekends and holidays)
3. Pass CE, FCC, ROHS certification: 100% inspection before transportation to ensure product safety
4. Night fluorescent function, multiple combinations (free pairing signal), remote remote control
5.Professional after-sales team: Shoot a large number of videos to handle various anomalies and quickly solve customer problems
6. There is no need to change the wire for replacement, just install a wireless receiver on the front of the lamp. The position of the wireless switch can be installed at will and can be moved freely within the effective range without wiring.
Pairing signal:
1. Press and hold the controller for 3 seconds to enter the code matching mode (the code indicator light flashes 5 times).
At this time, press the wireless switch 2 times and wait for 2 seconds. The code is successful (the default is always on);
clear the signal
Press and hold the controller for 10 seconds to clear the code (the code indicator flashes 10 times);
note：
1. professional electrician should operate this product. When powering on, do not touch the antenna. Install this product without opening the protective cover
2.This controller will not be available if a wall switch with RF function is installed at home. Otherwise the function will be affected. Just need to buy a separate wireless switch
3. Do not operate with power. Turn off the power supply and operate it. If the test is confirmed to be correct, use it under the guidance of a professional electrician.
4. When the voltage of the remote control is insufficient, please change the battery in time (the remote control distance becomes closer when the remote control battery voltage is insufficient).
5. When using wireless electronic products, care should be taken to avoid metal masks, large electronic devices, electromagne
#switch #wireless #receiver #smart switch #wireless switch #wall switch #switch panel #remote control switch #433mhz remote #433mhz receiver
Product Specifications
| Safety Mark | CE, RoHS, FCC |
|---|