Sell Immix School Hospital Wireless Smoke Detector Home Security Fire Alarm Sensor System Family Guard Home Independent Alarm best price
0
ratings
SGD 18.93
| Brand | No Brand |
|---|---|
| Ships from | Malaysia |
Product Description
Features:Fire smoke detector alarm
Fire smoke alarm, general ideal for all areas: residential, shops, hotels, restaurants, office buildings,
Schools, banks, libraries, computer rooms, warehouses and so on.
Alert and warn people away from danger when detecting smoke.
The detector uses a special structural design
ASIC, a dust, moth, anti-external light interference characteristics.
Alarm test button
Easy to install
Photoelectric sensors, from all directions for early detection
Alarm volume: 10 feet to 85 dB
Round size: R = 102mm, H = 31mm
Powered by 9V battery (not included)Product parameter:Excellent stability.
High sensitivity.
Alarm test button for easy testing.
Loud 85dB audio alarm.
Low battery indicator.
Alarm Indication:Red LED flash.
Easy to install with mounting hardware included.
Designed for the fastest possible installation.Technical Specification:Sound Level:gt;=85dB/m
Power: 9V non-rechargeable battery (Included).
Alarm Current: lt;=20mA.
Standby Current: lt;=10mu;A.
Operating Temperature: -10deg;C ~ +50deg;C.
Operating Humidity: lt;=95%RH.
Smoke Sensitivity: 2.36%/FTplusmn;1.251%/FT OBS.
Detecting Area: 20 square meter
Size: 107 mm Dia. * 35mm Deep
Material: ABS plastic.
Color: White.Installation and Test1. Taking the battery into battery box before installation.
2. Connect the power,the detector comes into operating state.Indicating LED flashes once per 40 seconds,once per 1 second at alarm state.
3. Select proper placee(normally mounted on the center of the ceiling),fix the mounting base,then put the detector into the base and turn it.
4. After installation,press the test button to test the output of the detector.LED should flash once per 1 s.The detector should give out sound.
5. You can press the test button to test the detector or blow a little of smoke into the detector to test if it work properly.The detector will recover to normal working state when the smoke disperse.Notice1. The detector can not be installed under worse environment.E.g. coldest,hottest,dusty.
2. Please test it monthly.
3. Please clean the detector by soft brush per 6 months to ensure the sensitivity artd life of product.Pay attention to switch off power before clean.
4. When the voltage of battery is low or the chamber is dirty,the detector will beep once per 40s.Please change the battery,at this condition.
5. For various reason,including,but not limited to changes in environmental conditions,electric disruptions and tampering,the product may not perfrom as expected.The user is advised to take all necessary precautions for his/her safety and the protection of his/her property.