Sell [Gypsophila] Dji Phantom 4 Pro Gimbal Camera Yaw Roll Bracket Arm Yaw Motor best price

Welcome to Gypsophila store, have a good shopping! Tips 1: Please note that these Motors is used. But it works because we tested before sell. For now,nobody have this new these Motors because dji company forbid to sell. Tips 2: Kindly reminder: These parts require professionals and professional tools to replace. Especially the Y motor, it need professinal tool to fix and replace. We recommend that you check with your local professinal repairnan before buy it. Tips 3: If the gimbal camera doesn't fixed in the center after install the Y motor, pls following below steps to settle the problem. Step 1: Measure the deviation angle of the gimbal camera; Step 2: Measure and mark making on the counterclockwise direction of the metal plate (the one for motor, above the shock-absorbing plate, next to the flat cable); Step 3: Drill a screw hole with an electric drill on the metal plate. (If the gimbal camera go to the left deviation of 45 degrees, then pls drill a hole of 45 degrees to the right.) Step 4: Install the Y motor.