Sell For SWITCH Accessories for JOY-CON Gamepad NS Wireless Sensor Handle Bluetooth Grip for JOY-CON Controller Left Right NS Switch Compatible with Switch Replacement - Neon Red/Neon Blue best price

Features: 1. The appearance is sleek and simple, compatible with the switch host, no need to download any driver, the handle can be paired with and support computer PC mode. 2. Using wireless Bluetooth connection, strong anti-interference ability, control freely, the connection signal is stable. 3. Each controller has a complete set of buttons that can be used as independent controllers. Each controller contains an accelerometer and gyro sensor for independent left and right motion control. 4. Wireless connection distance of about 8m, with built-in battery, rechargeable use. 5. Ergonomic design, comfortable grip, neon blue and neon red for Joy Pads. Parameters: 1. Type: NS Switch Controllers 2. Material: ABS 3. Color: red (left handle), blue (right handle) 4. Connection method: Bluetooth connection 5. Charging interface: Type-C 6. Memory: no 7. Wireless connection distance: about 8m/26.25ft. List: 1*pairs of handles 1*charging cable 1*instruction manual ***Operation： 1. Switch console settings Turn on the Switch console, pressing the “setting” on the menu, click successively “system settings”→“Airplane mode”→“Controller Connection” to turn on the Bluetooth function. 2. Connecting the Switch console by Bluetooth a.Turn on the controller by pressing any of the UP/DOWN/LEFT/RIGHT of the left controller and A/B/X/Y of the right controller, the 4 led will flashcircularly. b.Press 3 second for Mode button of the left controller or right controller, the led will be keeping flash and enter into the Bluetooth pairing mode. c.Turn on the home screen of the console , click the “controllers” on the menu, then click the “change grip/order”, the console will be searching andpairingthe controllers automatically. Press A button after connecting the controller, click the “close” to enter the menu, the you can play the game. 3. Automatic continuous connection If the controller have been connected with the console and the console’s Bluetooth is on, the controller will be connecting the console automatically when turn of the controller. 4. Turn on/off or charging/ sleep mode of the controller a.Turn on/off of the controller Turn on the controller by pressingUP/DOWN/LEFT/RIGHT of left controller orA/B/X/Y of right controller. The 4 LED will flash slowly and circularly if the controller turn on. Pressing 3 seconds of the Mode button to enter the pairing mode, releasing the mode button after the 4 LED flashing quickly and circularly. The LED will lighton if the paring is successful. Press the Mode button for 3 seconds, the controller will turn off when connect the console. b.Charging mode of the controller 1)Charging the controller by USB when the controller is off, the 4 LED will flash slowly. The 4 led will turn off after the fully charge. 2)When the controllers connected with the console through the slide way, the controller will be charged by the console if the console is charged by the USB.(If the console is not charged, when the voltage of the controller is lower than 3.7V, the controller also will be charged by console. c.Sleep mode of the controller 1)Under the pairing, if the controllers can not connect with the console, the controller will turn off automatically and enter into the sleep mode. 2)The controller will turn off automatically and enter into the sleep mode, if the controller have not been operated within 5 mins when connecting the console. 5. Re-set Please reset the controller, if the controller is abnormal, like button disorder, crash, connecting problem, etc. Please use the slender object, like needle, insert and press the reset hole on the back of the controller, the controller will be reset. 6. Sensor calibration Put the controller on the table, Press “SR+Mode” to open the controller, the LED1&LED2 will light on. Then press the SL to calibration. Please note the controller must put on the table. 7. 3D calibration Press L3/R3 to turn on the controller, the LED3 &LED 4 will light on. Press SL to start the Calibration. LED 1/2/3/4 will light on. Shaking the controller for several times and press SL to finish the test.