Sell Epoxy Resin AB Glue 100g 300g 1kg Crystal Clear Hard Transparent DIY Jewelry Art Model Carbon Fiber Mold Maker 水晶滴胶 best price
0
ratings
SGD 7.75 - SGD 18.82
Ships from | Malaysia |
---|---|
Grams | 100g 300g 1000g |
Product Description
Features:
1. Clear, high-transparency, high-gloss glue
2. It only takes about 24 hours to solidify quickly
3. Strong hardness, not easy to turn yellow, automatic defoaming
Specification:
Weight: 100g (A=75g + B=25g) 300g (A=225g + B=75g) 1000g (A=750g + B=250g)
Type: Hard (Like PVC)
Color: Crystal Clear (Transparent, can add color)
Weight Ratio: 3:1 (Resin:Hardener)
Volume Ratio: (NOT recommended): 2.25:1 (Resin:Hardener)
Cure Time: 20 hours for 1cm thickness at 25°C
Suitable for use in jewelry, furniture, carbon fibre, DIY mini projects and etc.
Note: Please leave it 48 hours to achieve fully hardened.
INSTRUCTIONS.
1. Clean your mold and product.
2. Mixing Epoxy Resin (A : B in Weight Ratio 3 : 1 )
- Epoxy requires a minimum mass of material for the chemical reaction to occur, ensuring that the material cures properly. We suggest to mix minimum 9 grams of resins (Part A) with 3 grams of hardener (Part B)
- Pour 9 grams of Resins (Part A) to 3 grams of Hardener (Part B)into an empty plastic cup (with total reading of 12 grams).
- Make sure to mix the 2 part epoxy according to the weight ratio 3 : 1 (Part A : B)
- Stir the mixture slowly using stick or mini spoon. This will minimize the possibility of air bubbles forming in the mixture.
- Let the mixture sit for 5-10 minutes to allow any air bubbles to rise to the surface.
Note: For volume ratio, A : B = 2.25 : 1
Example: 22.5ml A mix with 10ml B
NOTE: SUGGEST TO ADD IN SLIGHTLY MORE HARDENER (5% EXTRA) IF USE VOLUMETRIC MEASUREMENTS.
Pour epoxy resin into mold:
- Remove any air bubbles which may have formed during the application. Simply place the toothpick on the bubble and
draw it towards the surface.
- Once applied, please allow minimum 16 hours for the mixture to be cured.
- Be sure to check on it periodically to make sure no air bubbles have formed in your design.