Sell DIYMORE Waterproof Automatic Photoelectric Active Infrared Human Body Sensor Probe NEW best price
0
ratings
SGD 21.45
53% OFF
SGD 10.13
Ships from | Mainland China |
---|---|
Select Product | XKC-001A-T-F5 XKC-001A-T-Z5 XKC-001A-T-NC XKC-001A-T-NO XKC-001A-T-F12 XKC-001A-T-Z12 |
Product Description
1.Output method
XKC-001A-T is an intelligent non-contact switch, infrared sensor with high and low level or NPN drive output. The sensor uses the principle of diffuse reflection of infrared light on objects: when people or objects enter the sensor set In the sensing area, the sensor outputs a signal; the sensor turns off the output after a person or object leaves the sensing area.
Note:
The output mode is that one sensor can only have one output mode.
High and low level signal output: Only one high and low level signal is provided, which is suitable for small current control high current, control external circuit, MCU signal identification judgment, etc.
Switch output: The signal sent by the switch sensor is a contact signal, which has two states of open and closed. For example, an infrared sensor switch is a common switch sensor. When an object enters the sensing area set by the sensor, the infrared sensor switch is opened (or closed); when the object leaves the sensor set sensing area, the switch is closed (or opened).
NPN output: NPN output is one of the three-wire switch output. When the sensor output is isconnected, it is in a no-voltage floating state and can be connected to the VCC input voltage through a pull-up resistor. When the sensor output is closed, the voltage is 0V, which means it is turned on to 0V (negative power supply). NPN output can directly control the current within 300mA.
Working principle
1. Intelligent induction sanitary ware;
2. Home security;
3. Intelligent detection, intelligent control;
4. Robot obstacle recognition;
5. Faucet sensor, automatic flushing of toilet and toilet, automatic hand dryer, anti-theft device, automatic doorbell, stairway sensor, TV close-up TV reminder, automatic door, advertising light box, automatic trash can;
Technical Parameters
1. Operating Voltage:DC 5V~12V
2. Sensing distance:0cm~100cm, adjustable distance (sensing distance and obstacle color have a certain error, light color is far, dark color is close)
3. Sensing distance adjustment method:Automatically calibrate the sensing distance by pressing the button
4. Sensing angle:10~15°cone angle
5. Induction method:Proactive approach
6. Quiescent Current:<3.5 mA
7. No-load working current:5~50mA(The greater the sensing distance, the greater the working current) 8. High level output current:≤1.2mA sourcecurrent
9. Low-level output current:≤300mA sinkcurrent
10. NPN disconnect output current:0mA
11. NPN closed output current:≤300mA sinkcurrent
12. Output method:High and low level signal output / switch value NPN output
13. Indicator light:Red light is on
14. Working environment:Illumination: sunlight 10000Lx, incandescent lamp 3000Lx (Can work normally under direct sunlight 1 meter away from 1000W energy saving lamp)
15. Load current:<100mA
16. Working temperature: -20~85℃
17. Material:PC-V0 fireproof material
18. Waterproof performance:IP55
19. Safety standard certification
20. Environmental certification:ROHS-2.0
Product Specifications
Safety Mark | CE |
---|