Sell 🔥Cozy Cottage🔥[In Stock] Thaw And Heat Plate Fast Heat Diffuser Defrosting Tray Food Meat Thawing Pan Heat Conducting Plate Defrost Tool Kitchen Gas Stove Heat Conduction Plate Household Thaw Board Anti Burning Kitchen Utensils Stove Heat Diffuser best price

【Product Name】 Gas Stove Heat Conduction Plate 【product Overview】 Purpose: heat conduction thawing, energy-saving pot protection, preventing the bottom of the pot from burning black Material: Teflon non-stick coating + aviation aluminum Diameter: 24cm/28cm Thickness: 4mm/6mm 【Maintenance Instructions for Thermal Conductive Plate】 "Usage problems" Just place the frozen ingredients on the plate, no need to heat! Use warm water to quickly rinse before thawing, the thawing time is shorter, and you can also use warm water to rinse the thawing plate during successive thawing. When it returns to normal temperature, the thawing time can be shortened The heat conduction plate is only for open flame stoves Place the heat-conducting plate on the gas stove, and then place the pot on it Avoid excessive heat conduction, do not burn the heat conduction plate alone! The thermal conductive plate is suitable for slow cooking and stewing If you need to fry and cook quickly, it is recommended to use open flame directly Do not touch the heat transfer plate if it stops heating and still has residual heat! The residual heat can be maintained for 3-5 minutes. There is a difference between boiling and direct use of an open flame, so please pay attention to adjustment "Cleaning problem" How to clean after use? The heat conduction plate is a substitute for the pot to suffer from the fire, there will be traces after use, which may be difficult to remove. We do not recommend using steel wool or corrosive detergents to scrub! Recommend you the following cleaning methods: 1. Slightly dirty: Just wait for the board to cool down, soak it in warm water overnight, and wipe it with a soft cloth. Wipe off the obvious dirt, leaving a slight trace, no effect. 2. Severe oil pollution: apply baking soda to the board, moisten it with warm water, and then wrap it in plastic wrap. Wipe with warm water and soft cloth the next day, if there are light marks, it will not affect. 3. Severely dirty: Use neutral acid detergent to apply to the board, soak in warm water overnight, and then scrub with a soft cloth. If there are slight traces, there is no effect. 【Precautions for use】 1. When using the heat-conducting plate, only open flame stoves, and make sure that there is no obstruction around the heat-conducting plate 2. The heat-resistant temperature of the glass stove is low. Do not use a large fire when using the heat-conducting plate. The distance between the heated heat-conducting plate and the glass is greater than 6cm 3. Please turn on the range hood during use to prevent the surrounding temperature from being too high 4. After using unfreezing, wait for the heat transfer plate to cool down before cleaning 5. It is forbidden to touch with your hands directly after use, be careful of hot hands 6. It is forbidden to use corrosive and sharp cleaning tools 7. It is forbidden to burn the heat transfer plate alone 【Keywords】 #Thawing Plate