Sell Braveman ZZAW C1 Desktop Computer Case DIY Installation PC Chassis Aluminum Alloy MATX Case best price

Braveman ZZAW C1 Desktop Computer Case DIY Installation PC Chassis Aluminum Alloy MATX Case Hardwares Supported: 1. Motherboard: MATX motherboard(Size: 244*244mm), compatible with DTX(Size: 170*190mm) and ITX motherboards(Size: 170*170 mm) *Similar to Z390i motherboard IO vest super frame, water cooling needs thin fan 2. Graphics card: support the total length* width*thickness of about 353* 158*66(mm ) The total length and thickness are under the premise that a 25mm thick fan has been installed, supporting within 37mm of the shoulder (more than the height of the full-height IO chip) *The thickness is calculated based on the PCIE first slot, including the thickness of the back plate and vest 3. Heat dissipation: air-cooled-supports up to 5 fans with a diameter of 120 and 1 fan with a diameter of 90 4. CPU radiator height limit 138mm (from the surface of the CPU) 5. Water cooling: support 240/120 water cooling, cold head within 138mm Recommended length limit is 278, limit width is 124 and limit thickness is within 54mm * Both air-cooled and water-cooled modes support a 9025 fan at the bottom This fan can only be installed within 49mm of the motherboard IO vest 6. Power supply: Support ATX large power supply, compatible with SFX-L/SFX small power supply ATX power supply size is recommended 140 (length) * 150 * 86mm Length over 140mm may interfere with the top 12025 fan *Longer than 170mm will interfere with longer than 280 long graphics cards Specifications: 1. Hard Disk: Support 2.5-inch hard disk position*2 and 3.5-inch hard disk position*2 2.5 inch hard drive limit height 8mm The 3.5-inch hard drive shares the position with the 120 fan on the front panel 2. Features: magnesium-aluminum material, large side penetration, support for full-size long graphics cards 3. 240 water cooling\MATX motherboard ATX power supply\3.5 hard drive Materials: 5052 magnesium aluminum alloy body + tempered glass side panel 4. The thickness of the shell aluminum plate is 2.0mm, and the thickness of tempered glass is 3.0 5. Internal bracket and accessories equal thickness 1.5mm 6. Color: Anodized gun color (space gray) different batches of color The color will be slightly different, please refer to the actual product. Expansion: 2 high-speed USB3.0 on the front panel and switch with indicator light 1 key (including wire), 1 built-in power extension cord 7. Size: (width*height* depth) 165mm* 428mm * 313mm 8. Weight: Net weight 2. 9KG, Gross weight 4KG (shipping weight) Package Including: 1* C1 MATX Case 1* Switch Wire 1* Black PVC dustproof net for the back of the front panel 1* Black protective cover for the outlet hole of the rear plate 2* 120 fan brackets (shared hard disk holes) 1* Accessories Bag