Sell BOSSMAN EPOXY AB GLUE EPOXY ADHESIVE 5MIN FAST GAM BS030 6500PSI best price

-Bonds in 5 minutes -Super Adhesive Effect -Tranparent After dry -Ideal for : Metal,Porcelain,Wood,Concrete,Pottery,Marble,Rigid,Plastic BOSSMAN Super Fast is a quick-setting, two-part epoxy adhesive suitable for bonding most materials, e.g. metal, porcelain, wood, concrete, pottery, marble and many rigid plastic. Epoxy Fast sets in approximately minutes and after this time bond strength is usually sufficient for handling. No undue strain should be applied to the bond for 30 minutes. Very high bond strength is attained after 16 hours. Fills gap works even when surfaces do not fit perfectly. *Not for polypropylene or polyethylene. Note that bond strengths reduce at temperatures greater than 60°C. DIRECTIONS: 1. Surfaces to be repaired should be clean and dry 2. Unscrew caps of each tube and pierce tube seal with reverse end of own cap to avoid contamination. 3. Dispense equal amount of resin and hardener (Parts A and B) onto a clean disposable surface and mix thoroughly. The mixture will remain usable for 3-4 minutes. 4. Apply to surfaces to be repaired, bring together and allow to harden. 5. To reseal, wipe nozzles clean and replace caps to original tube (colour coded), or hardening may occur in tube nozzle. SAFETY DIRECTION: Avoid contact with eyes and skin and avoid breathing its vapour. Wear eye protection and gloves when mixing and using. CAUTION: If poisoning occurs, contact doctor. If swallowed, do not induce vomiting, drink a glass of water and seek for medication. If skin contact occurs, quickly remove contaminated clothing and wash skin thoroughly. If in eyes, hold eyes open, flush with water for at least 15 minutes and see a doctor immediately