Sell ATZ HDBaseT HDMI Extender over Cat5e/Cat6 w/IR+RS232 (100m) [TX/RX] best price

The cat5e/cat6 HDMI Extender is a tool which can extend your HDMI signal over 328fts/100meters to a compatible display. It is designed to convert HDMI signal to standard HD BaseT signal which can be transmitted by Internet cable. It also supports Transfer Bidirectional Infrared control signal \RS232 control signal\Internet signal together with the HDMI signal, so you can control the Source in the Sink side which is 328fts outside, also you can control the Sink in the Source side which is 328fts outside using the HDMI Extender. Features: - POE(Power Over Ethernet)function support, either TX or RX powered 24V@1A,another don’t need power form the DC jack. POE Power Consumption less than 10W. ※ See the description 1 - Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distances transmission. - UTP cable termination follows the standard of IEEE-568A or IEEE-568B. - Transmission distance: ※Over CAT6 cable 100 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit; 70 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit. - Support display resolutions up to 4K x 2K@30Hz - Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit Specifications: - Frequency Bandwidth : 2.97Gbps - Transmitter Input/Output Ports : 1x HDMI Female port/2xCAT6, 1x IR TX/1x IR RX/1xPhoenix - Receiver Input/Output Ports : 1xHDMI Female port/2xCAT6, 1x IR TX/1x IR RX/1xPhoenix - Power Supply : DC 24V 1A - ESD Protection : plus minu 8kV (air-gap discharge) - Human Body Model : Plus minus 4kV (contact discharge) - Dimensions (mm) : 100(W) X 100 (D) X 25 (H) - Weight : 320g x 2 - Operating Temperature : 0 Degree Celsius  ~ 40 Degree Celsius   - Storage Temperature : -20 Degree Celsius  ~ 60 Degree Celsius   - Relative Humidity : 20~90% RH (Non-condensing)  - Power Consumption (Max) : 10W