Sell [Adp-Stock]12V 4-Pin 10 Ports RGB HUB 12V Motherboard RGB Controller 1-10 Splitter best price

12V 4-Pin 10 Ports RGB HUB 12V Motherboard RGB Controller 1-10 Splitter Extension Adapter for PC Computer Desktop Features: It is used to expand the RGB interface on the motherboard. One RGB interface can be divided into ten, which is used to uniformly control multiple fans and light strips that support motherboard dimming. 12V 4-pin ten-channel RGB expansion HUB connects to the 4-pin RGB interface of the computer motherboard. The back of the HUB circuit board is provided with adhesive to choose the installation location according to your needs. Specification: RGB Interface: 12V 4Pin Corresponding Interface: Motherboard 12V RGB Interface Connect RGB: 10 Material Type: 3mm Acrylic Board Size: 88 X 38 X 14mm/3.46 X 1.5 X 0.55" Line Length: 50cm/19.69" Precautions: 1. This HUB cannot improve the extra power supply of the RGB interface of the motherboard. Generally, the RGB interface can provide at least 12W of power supply. It can be connected to 10 for Aura fans for uniform dimming. It is difficult for the home to connect the total length more than 1m RGB light strip. After the interface load is overloaded, the brightness of the light will be dimmed and the quantity of device needs to be reduced. 2. Wiring Skills: Remember that the arrow mark on the plug corresponds to the RGB pin 12V. 3. The pins of the standard RGB interface are round pins. Individual water cooler block interface support the motherboard dimming requires the square pin. The two pins are not universal. Please confirm whether your motherboard supports it when purchasing. 4. The function of this HUB is to expand the RGB connectors, non power supply for fan. Note: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3mm measuring deviation due to manual measurement. Included: 1 X 12V 4-Pin 10 Ports RGB HUB 1 X RGB Extension Cable