Sell 300Mbps Wifi Repeater Wireless Wifi Repeater Signal Range Extender 802.11N/B/G Wifi Access Point best price

~~ This tool to amplify/catch/expand wifi Network signal~~ Wifi 802.11g is a wireless connection with maximum speed and maximum rate. Maximal speed up to 300mb/s and also supports WLAN Network 2.4GHz. You can switch this repeater WiFi function as Access Point or regular router. Portable Design It has a small shape and is easy to carry so it can be used anywhere you need WiFi signal. Package CONTENTS The stuff you can in the product box: 1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189 1 x LAN Cable 1 x Manual Portable wifi for signal booster router repeater at high speed, simple installation or use, your connection will be more convenient. Specifications: ● Power 802.11b: 17dBm±1.5 dBm ● 802.11g: 14dBm±1.5 dBm ● 802.11n: 14dBm±1.5 dBm ● 802.11b sensitivity: -83dBm /802.11g: -70dBm / 802.11n: -68dBm ● 2 x 3dBi Antenna Integrated Antenna ● Distance Outdoors 300m, Indoor 100m (According to actual environmental changes) ● 64/128-bit safety WEP, AES, TIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS Software: ● Rfc768 Standard Version User Protocol Datagram (UDP) ● 64/128/152-bit WEP ● Wpa-psk / WPA2-PSK, WPA / WPA2 ● Ip bandwidth control function (Support router mode) ● Dns Relay (Support router mode) ● Pass-through VPN (Router mode support) ● Static router (Support router mode) ● Dhcp Server:support Router mode ● Dhcp Settings server list (Support router mode) ● Static IP address allocation (Support router mode) Security: ● Mac IP and address settings bind against ARP attack (support Router mode) ● Ip address filtering:router mode support ● Screening Name:support Router mode ● Mac address filtering (Support router mode) ● Statistics:traffic Tool System Hardware System: ● Port 1 x RJ45 Jack ● Wps Reset Button ● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS ● Rtl8196e chipset ● Flash 16Mbps ● 128mbps sdRAM ● Internal power supply:DC5V/1A ● Eu plug power plug ● Power consumption:2.3W ● 100-240 VAC 50 / 60Hz voltage / frequency / current, 0.1A Max., System Requirements: ● Wlan access line / client fits IEEE 802.11n / g / b. ● 110 ~ 230 volt socket. ● Wlan clients should support at least WPA encryption standards. ● Wlan access line and WLAN client with auto IP address fixing (DHCP). ● Ipv4-based Protocol forwarding / Address Resolution Protocol. ● Network name (SSID) from WLAN access point should be set to "visible". Environmental ● Operational Temperature: 0degree~40degree ● Storage Temperature: -40 degree ~ 70 degree ● Relative Humidity: 10%~90% (Non Condensing) Note: Please check if WiFi-Repeater corresponds to factory default settings once you cannot download 192.168.1.1 if you are ma