Sell 1080P Mini Hidden Camera Wireless WiFi Night Vision IP NVR Nanny Cam best price

Fetures: 1920*1080P HD lens, clear monitoring Real night vision lens, with four night vision sensor lights, no light night vision, 24 hours clear monitoring Short-range hotspot connection monitoring + remote WiFi monitoring, local video recording, complete functions. (Currently, there are few styles of this type of back clip that support remote WiFi) With clear microphone, recording monitoring sound With mobile detection and alarm functions, timely reminders of abnormalities (set in the advanced settings of the APP) Mini lens design, DIY installation All-in-one host design + long lens, built-in battery, more concise and convenient than the old DIY camera Built-in 500 mAh battery, can shoot continuously for about an hour. Can be connected to the power cord for household use Specification: Main control chip: Hisilicon Lens resolution: 1920*1080P Lens pixel: 200W Video format: AVI Lens angle of view: 90 degrees Mobile monitoring distance: 6 meters in a straight line Night vision distance: 5 meters (Real Night Vision) Battery capacity: 500 mA Continuous shooting time: about 1 hour Memory card: maximum support 128G (not included) The original security password of the camera: 123456 APP name: LOOKCAM PP interface: there are brightness adjustment, screen saturation adjustment, night vision mode switch, indicator switch, screenshots and video can be operated. "Advanced settings" option can be set up alarm, night vision switch and other functions How to use? Put the formatted C10 memory card into the camera, turn it on → wait for a while to find the camera's own hotspot (beginning with F) on the WiFi of the phone, and the connection does not require a password → enter the APP, the camera shows online, and you can View the monitoring screen directly, you can modify the device access password (original password 123456) → click Settings on the right to enter the advanced settings, click on the WiFi connection configuration to guide the camera to connect to WiFi. This page can also turn on the alarm, set local recording, infrared night vision, change password, restart the camera, restore factory settings, etc. → wait for the camera to restart after connecting to WiFi, and then you can remotely monitor. See the instructions for more details. Package Include: 1x camera body 1x Micro USB power cord (length about 80cm) 1x card reader 1x reset pin 1x manual Note: 1. The supplier is equipped with a general manual, some parameters are different from the product, and the details shall prevail 2. The product access password is 123456, which should be modified in time when using it 3. When the product is in use, if it freezes or cannot enter the picture, you can press the reset button for 5 seconds to reset the camera. 4. It is normal for the camera to have heat during use, and it will not affect the normal service life and functions of the camera