Sell 100pcs/lot SC UPC Cold connector NPFG 60mm 0.3 dB SC-UPC fast connector Fiber optical connector best price

Description Quick Assembly Connector (also named “ No-Polish Connector ” , “Pre-polish Connector” or “ Fast Connector ”) is an easy-to-install device. No tool or jig is required. It is universal for 250um /900um / 2.0mm / 3.0mm / Flat Cable. it was designed for fast termination with pre-polished connector. Using V groove technology, it requires no epoxy. With transparent body, the connecting result can be seen by Fiber Checker immediately. This is an ideal solution, either for outside plant or inside a building. Optic Fiber Fast Connector -Simple structure -Save time -Low insertion loss. Feature -Based on the pluggable non-preset tube technology -Precision ceramic components with co-axial self centering, Excellent and durable optical property -Optical fiber fits axially in elastic way and avoids completely any false connect -Triple clamping through the naked fiber, tight buffer and cable, etc., can be used as patchcord -High on-line tensile strength of Optical Fast Connector after terminating, always keep connecting under the force from cabling and drawing. -Integrated protection of the casing to withstand harsh user environment. -Directly connectable with ONU without any optical socket, which reduces FTTH cost. -High success rate and easiness in installation with average splicing time 100 sec -Lower requirement for the habit working and work environment call for to the builder. -Visible Installation quality; independent from any far end light source and special device satisfying cabling construction in any sectioned way. Specification ITEM Technical Parameters Applicable for 3.1 x 2.0 mm Drop cable Optical fiber diameter 125μm ( 657A & 657B ) Tight buffer diameter 250μm Fiber mode Single mode Operation time About 100s(no fiber cut) Insert loss ≤ 0.3dB(1310nm & 1550nm) Return loss ≥40dB Fastening strength of naked fiber >5 N Fastening strength of naked fiber holder >10 N Tensile strength >50 N Using temperature -40~+80°C On-line tensile strength (20 N) IL ≤ 0.2dB RL ≤ 5dB Mechanical durability (500 times) IL ≤ 0.2dB RL ≤ 5dB Drop-off test (drop-off height 4m, once per direction, totally 3 times) IL ≤ 0.2dB RL ≤ 5dB