Sell (1 Year Warranty) Snzvok Screen LCD Display Touch Screen For iPhone 6 6S 7 8 PLUS 3D Touch Digitizer Assembly best price

Note: Please read ♔ before buying ！ Brand: Snzvok Quality：A++ inventory：Yes Display Type: Multi- Touch (IPS tech) Outer Glass: Corning Gorilla Glass 3 Color: Black/white 100% Brand New and never used LCD. perfectly compatible ：For iPhone 5/5S/6/6S/6SPlus/7/7Plus/8/8Plus ♔Please make sure you have the operating experience of installing the display screen! ! if no ！！Please bring the screen to the repair shop for repair . ♔After receiving the goods, the screen should be tested and installed only if the test passes. If the screen detects a problem during the test, do not install it to the phone! We should be contacted ! ♔The screen is very fragile, incorrect installation method will cause the screen to break, please be sure to test before using glue or screws to install. If the test works perfectly at first, but many lines appear after installation, this is because the screen is broken during installation and becomes damaged. This situation will lose the warranty on the screen. ♔In order to better seal and protect, for international transportation, some models we remove the retail packaging and use white foam box packaging. ♔LCD is divided into A and B quality, A is without any display defects, B is with display defects but can operate normally. We send 100% Class A goods. ♔It does not include front camera and earpiece and sensors components so please swap them out from your old screen and install them. ♔All lcd screen replacement are strictly QC double tested and 100% in good condition before shipping and working perfectly, more wearable. We believe in our products, and we offer one year warranty service for non man-made quality issues. Notes: (1)Power Off the device before starting. (2)Use the correct screwdriver to open the screws. (3)Need to remark the screws and keep in mind its’ original position. (4)Remember to disassembly the battery connector when doing further steps. (5)Do not forget to test the LCD. (6)Be careful to disassembly the home button, it is easy broken. (7)Avoid to pull the flex cable too hard. (8)Do not press the upper 2 corners of the LCD, it is easy damaged. (9)If the phone does not turn on after the installation is complete, please pry the battery connector up and reconnect it，then turn the phone on again. Packing List: 1 x 100% tested LCD Assembly 1 x Screen Protector(High Quality Temper Glass) 1 x Repair Tools Kit(Professional Set - 8 Pieces) 1 x Cleaning Wipes Set(2Cleaning Wipes+1Dust absorber)